1 Inch Risers - End Mill Design - Suzuki M109 ulli1 inch taller than stock Ball End Mill Design for Suzuki M109R.ulNote: Item KEWL-KD-209 riser caps and stock tach mount bracket are required for mounting stock tachometer onto these chrome risers sold separately.
Part Number: KD-207 MSRP: CAN$198.19 Price: CAN$178.63
Part Number: KD-208 MSRP: CAN$198.19 Price: CAN$178.63
10 Plate Clutch Kit- Honda VTX 1800 Models ulliThis Kit converts your standard 8 plate kit to a 10 plate kit for all out performance and durabiltyliThis kit was made exclusivley for KewlMetal Buy ENERGY ONE Performance Clutches Racing Clutches.liThis 10 plate performance Clutch offers 24 more clutch surfaceEnergy One has over 50 years experience in the motorcycle and automotive industry manufacturing internal transmission parts such as clutch plates and springs and other internal parts. All clutch plates are manufactured in-house for control of quality. All materials are made in U.S.A.All clutch plates are made of either 6061 T6 or high tempered steel with Energy Ones own race proven Kevlar material. Each plate design was tested so maximum performance is achieved. Different groove patterns were designed for maximum oil circulation and heat dissipation. The steady flow of lubricant will cool and determine the longevity of your clutch. All Big Twin kits are packaged with frictions and steels and a pre-measured stack height for easy installation. Energy One is not just selling parts we sell engineered performance parts manufactured in house by us.These performance clutch plates have been race proven tested and used bycompanies such as Belt Drives Ltd. and Rivera EngineeringPrimo.
Part Number: KD-151 MSRP: CAN$142.17 Price: CAN$128.49
8 Plate Clutch Kit - Stock - Honda VTX1300 ulliDirect replacement for your standard 8 plate clutch kit for all out performance and durabilityliThis kit was made exclusively for KewlMetal By ENERGY ONE Performance Clutches Racing Clutches.liEnergy One has over 50 years experience in the motorcycle and automotive industry manufacturing internal transmission parts such as clutch plates and springs and other internal parts. liAll clutch plates are manufactured in-house for control of quality. liAll materials are made in U.S.A.liAll clutch plates are made of either 6061 T6 or high tempered steel with Energy Ones own race proven Kevlar material. liEach plate design was tested so maximum performance is achieved. liDifferent groove patterns were designed for maximum oil circulation and heat dissipation. liThe steady flow of lubricant will cool and determine the longevity of your clutch. liAll Big Twin kits are packaged with frictions and steels and a pre-measured stack height for easy installation. liEnergy One is not just selling parts we sell engineered performance parts manufactured in house by us.ulThese performance clutch plates have been race proven tested and used bycompanies such as Belt Drives Ltd. and Rivera EngineeringPrimo.
Part Number: KD-152 MSRP: CAN$105.73 Price: CAN$95.58
8 Plate Clutch Kit - Stock - Honda VTX1800 ulliDirect replacement for your standard 8 plate clutch kit for all out performance and durabilityliThis kit was made exclusively for KewlMetal By ENERGY ONE Performance Clutches Racing Clutches.liEnergy One has over 50 years experience in the motorcycle and automotive industry manufacturing internal transmission parts such as clutch plates and springs and other internal parts. liAll clutch plates are manufactured in-house for control of quality. liAll materials are made in U.S.A.liAll clutch plates are made of either 6061 T6 or high tempered steel with Energy Ones own race proven Kevlar material. liEach plate design was tested so maximum performance is achieved. liDifferent groove patterns were designed for maximum oil circulation and heat dissipation. liThe steady flow of lubricant will cool and determine the longevity of your clutch. liAll Big Twin kits are packaged with frictions and steels and a pre-measured stack height for easy installation. liEnergy One is not just selling parts we sell engineered performance parts manufactured in house by us.ulThese performance clutch plates have been race proven tested and used bycompanies such as Belt Drives Ltd. and Rivera EngineeringPrimo.
Part Number: KD-150 MSRP: CAN$116.7 Price: CAN$105.76
9 Plate Clutch Kit- Honda VTX 1300 Models ulliThis Kit converts your standard 8 plate kit to a 9 plate kit for all out performance and durabiltyliThis kit was made exclusivley for KewlMetal Buy ENERGY ONE Performance Clutches Racing Clutches.This 9 plate performance Clutch offers 24 more clutch surfaceEnergy One has over 50 years experience in the motorcycle and automotive industry manufacturing internal transmission parts such as clutch plates and springs and other internal parts. All clutch plates are manufactured in-house for control of quality. All materials are made in U.S.A.All clutch plates are made of either 6061 T6 or high tempered steel with Energy Ones own race proven Kevlar material. Each plate design was tested so maximum performance is achieved. Different groove patterns were designed for maximum oil circulation and heat dissipation. The steady flow of lubricant will cool and determine the longevity of your clutch. All Big Twin kits are packaged with frictions and steels and a pre-measured stack height for easy installation. Energy One is not just selling parts we sell engineered performance parts manufactured in house by us.These performance clutch plates have been race proven tested and used bycompanies such as Belt Drives Ltd. and Rivera EngineeringPrimo.
Part Number: KD-153 MSRP: CAN$142.17 Price: CAN$128.49
Adjustable Risers - Can-Am Spyder RS ulliAdjustable Risers for the Can-Am Spyder RS. liThese risers are adjustable in height from 2 inches to 5 inches. liThey also allow you to adjust the angle of your grips to any angle you like. liAccommodates riders from under 5 tall to over 6 tall. Watch the video for more info. liSold as a set Left and Right. Includes dress up capsul
Part Number: KD-251 MSRP: CAN$258.52 Price: CAN$232.69
Backrest Assembly For Spyder Luggage Rack - Can-Am Spyder ulliBackrest Assembly Spyder Luggage Rack.liThis passenger backrest mounts to your Kewlmetal Spyder luggage rack.liThis backrest is very easy to install on your Can-Am Spyderul
Part Number: KD-241 MSRP: CAN$112 Price: CAN$101.06
Backrest For Solo Rider and Passenger ulliKewlMetal Padded Backrest for solo Rider and passenger. Completely adjustable back and forth and up and down.ul
Part Number: 462 MSRP: CAN$160.26 Price: CAN$144.94
Billet Aluminum Hard Chromed Fork Caps - Multiple Applications Available These CNC cut billet aluminum caps are perfectly mirror polished and hard chromed. The clean chamfered design adds a very clean and custom look to the top of your fork tubes. These install with clear silicone which unlike a set screw they will not come loose they can be perfectly centered and they do not damage the fork cap underneath. They can be easily removed and re-installed for fork maintenance.Fits the following Bikes:VTX1800C VTX1800R Valkyrie Kawasaki Mean Streak Suzuki Murauder Suzuki M109R more to come as we qualify them.
Part Number: 161 MSRP: CAN$34.43 Price: CAN$31.33
Billet Driving Lights Gorgeous sculpted billet driving lights perfectly polished and chromed. Designed to replace the footpeg spacers on the VTX1800C. Can be mounted in other applications as well.
Part Number: KD-170 MSRP: CAN$517.07 Price: CAN$465.39
Billet Risers - VTX1300C Sculpted Chrome Billet Risers for the VTX1300. Same as 195 Risers with 1 inch additional rise. These gorgeous chrome risers move your stock handlebars back and lay them down 10 degrees from the stock position. This moves the hand grips back 2.0 inches and up 1 inch. Gives your front end a whole new look and feel greatly increasing rider comfort. No need to replace your cables
Part Number: 370 MSRP: CAN$137.86 Price: CAN$124.57
Bolt On Pro Street Kit - VTX1300 This BOLT ON kit will rake your front forks to 45 degrees AND maintain correct trail numbers. The engineering geometry of this setup results in the front end being LIGHTER than stock at both low speed and high speed. High speed stability is excellent.These parts are all high quality billet 6061 T6 aluminum and steel where required CAD designed and CNC machined to exacting specifications. The chrome is show quality period. A new steel steering shaft that is stronger than your stock shaft is included. The kit also includes brand new upgraded steering bearings.This kit TOTALLY transforms the look of your bike with no welding required. Installation time is 8 hours in your garage.This Kit Includes EVERYTHING you will need except the extended brake lines for the front brake. All hardware necessary to rake and extend your forks is included.Extended brake lines are Item SPE-1158. This is everything you will need if you are running stock bars.Fits the VTX1300 all Models.
Part Number: 283 MSRP: CAN$2068.4 Price: CAN$1861.59
Part Number: SPE-1179 MSRP: CAN$78.31 Price: CAN$70.51
Brake Manifold Cover Cover that ugly brake manifold with our highly polished stainless steel manifold cover box. Beautifully crafted and polished to a mirror finish these covers add that extra clean touch to making your VTX look like a totally custom cruiser. Comes with 6 stainless steel button head screws to complete the job. Installation is simple no need to take apart any brake lines the cover just slips on and only takes minutes to install. You can clean up the whole lower triple tree by adding the Kewlmetal Lower Tree Cover as well Item KEWL-163 wfat forks.
Part Number: 165 MSRP: CAN$68.91 Price: CAN$62.67
Bullet Light - Small - Curve Bezel wHoles ulliThese KewlMetal lights are CAD designed and then machined by a precision CNC lathe and mill.liCompletely concealed clean assembly no screws are used to hold these together super slick and clean custom look. For use as a turn signal driving lights tail lights. Comes with 8mm hollow mounting bolt.ulWARNING: If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 430 MSRP: CAN$137.86 Price: CAN$124.57
Bullet Light - Small - Flame Bezel ulliThese KewlMetal 1-12 inch Bullet lights have 3 Dimensional FLAME Bezels Sold as a pair liThese lights are UNIQUE in the motorcycle market place liThey are CAD designed and then perfectly cut by a precision CNC lathe and mill from 6061-T6 Billet Aluminum. liCompletely concealed clean assembly no screws are used to hold these together super slick and clean custom look. liFor Use as a turn signal or tail light or whatever your imagination can come up with liThis kit comes with 8mm hollow mounting bolt. liYou simply wont find a nicer more unique or more beautiful bullet light.ulWARNING: If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 432 MSRP: CAN$155.09 Price: CAN$140.24
Bullet Light - Small - Flat Bezel ulliThese KewlMetal 1-12 inch Bullet lights have 3 Dimensional FLAT Bezels Sold as a pair liThese lights are UNIQUE in the motorcycle market place liThey are CAD designed and then perfectly cut by a precision CNC lathe and mill from 6061-T6 Billet Aluminum. liCompletely concealed clean assembly no screws are used to hold these together super slick and clean custom look. liFor Use as a turn signal or tail light or whatever your imagination can come up with liThis kit comes with 8mm hollow mounting bolt. liYou simply wont find a nicer more unique or more beautiful bullet light.ulWARNING: If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 433 MSRP: CAN$137.86 Price: CAN$124.57
Bullet Light - Small - Flat Bezel w Holes ulliThese KewlMetal 1-12 inch Bullet lights have 3 Dimensional FLAT Bezels Sold as a pair liThese lights are UNIQUE in the motorcycle market place liThey are CAD designed and then perfectly cut by a precision CNC lathe and mill from 6061-T6 Billet Aluminum. liCompletely concealed clean assembly no screws are used to hold these together super slick and clean custom look. liFor Use as a turn signal or tail light or whatever your imagination can come up with liThis kit comes with 8mm hollow mounting bolt. liYou simply wont find a nicer more unique or more beautiful bullet light.ulWARNING: If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 434 MSRP: CAN$137.86 Price: CAN$124.57
Bullet Light LED - Small - Curve Bezel wHoles ulliThese KewlMetal lights are CAD designed and then machined by a precision CNC lathe and mill.liCompletely concealed clean assembly no screws are used to hold these together super slick and clean custom look. For use as a turn signal driving lights tail lights. Comes with 8mm hollow mounting bolt.ul
Part Number: 431L MSRP: CAN$163.71 Price: CAN$148.07
Bullet Light LED - Small - Flame Bezel ulliThese KewlMetal 1-12 inch Bullet lights have 3 Dimensional FLAME Bezels Sold as a pair liThese lights are UNIQUE in the motorcycle market place liThey are CAD designed and then perfectly cut by a precision CNC lathe and mill from 6061-T6 Billet Aluminum. liCompletely concealed clean assembly no screws are used to hold these together super slick and clean custom look. liFor Use as a turn signal or tail light or whatever your imagination can come up with liThis kit comes with 8mm hollow mounting bolt. liYou simply wont find a nicer more unique or more beautiful bullet light.ulNOTE: The 48 LED white cluster and the specs are as follows:Each LED bulb has an output of 10000 MCD milli candela at 25 degreeviewing angle.The total current draw at full brightness is .4 AmpsThe total power consumption at full brightness is 4.8 wattsbWARNING:b If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 432L MSRP: CAN$180.95 Price: CAN$162.96
Bullet Light LED - Small - Flat Bezel ulliThese KewlMetal 1-12 inch Bullet lights have 3 Dimensional FLAT Bezels Sold as a pair liThese lights are UNIQUE in the motorcycle market place liThey are CAD designed and then perfectly cut by a precision CNC lathe and mill from 6061-T6 Billet Aluminum. liCompletely concealed clean assembly no screws are used to hold these together super slick and clean custom look. liFor Use as a turn signal or tail light or whatever your imagination can come up with liThis kit comes with 8mm hollow mounting bolt. liYou simply wont find a nicer more unique or more beautiful bullet light.ulNOTE:The 48 LED white cluster and the specs are as follows:Each LED bulb has an output of 10000 MCD milli candela at 25 degreeviewing angle.The total current draw at full brightness is .4 AmpsThe total power consumption at full brightness is 4.8 wattsbWARNING:b If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 433L MSRP: CAN$163.71 Price: CAN$148.07
Bullet Light LED - Small - Flat Bezel w Holes ulliThese KewlMetal 1-12 inch Bullet lights have 3 Dimensional FLAT Bezels Sold as a pair liThese lights are UNIQUE in the motorcycle market place liThey are CAD designed and then perfectly cut by a precision CNC lathe and mill from 6061-T6 Billet Aluminum. liCompletely concealed clean assembly no screws are used to hold these together super slick and clean custom look. liFor Use as a turn signal or tail light or whatever your imagination can come up with liThis kit comes with 8mm hollow mounting bolt.liYou simply wont find a nicer more unique or more beautiful bullet light.ulNOTE: The 48 LED white cluster and the specs are as follows:Each LED bulb has an output of 10000 MCD milli candela at 25 degreeviewing angle.The total current draw at full brightness is .4 AmpsThe total power consumption at full brightness is 4.8 wattsbWARNING:b If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 434L MSRP: CAN$163.71 Price: CAN$148.07
Bullet Light Mount Bracket for the Victory Kingpin. Fits the Victory Kingpin. These bullet signal mounts are beautifully cut by a precision CNC laser and then hard chrome plated. For mounting bullet style turn signals or driving lights. Mounts next to the headlight.
Part Number: 205 MSRP: CAN$43.05 Price: CAN$39.17
Bullet Light Mounts Pair - Victory Kingpin Jackpot Vegas 8Ball 09 - Newer ulliThese bullet light mount brackets are beautifully cut by a precision CNC laser and then triple chrome plated to a show quality finish. liUsed for mounting 1-12 or 2 bullet style turn signals or driving lights. liKewlMetal Bullet light brackets are used to relocate your bullet style lights next to the headlight for that clean custom look.ulNote: Victory Riders if using Kryakyns HALOGEN Silver Bullets as turn signals the Halogen light bulbs need to be changed out to 10 watts.
Part Number: 506 MSRP: CAN$43.05 Price: CAN$39.17
Bungee Brackets Trailer tie down hooks. These slip over your Kewlmetal bungee buttons to create the perfect rear tie down.
Part Number: 336 MSRP: CAN$21.51 Price: CAN$19.58
Bungee Buttons Save your fender with these CNC machined billet aluminum hard chromed Bungee Buttons. The Slot is perfectly sized for a bungee chord hook. Comes in pairs each item includes 2 CNC bungee buttons and 2 bolts with chromed or mirror-polished heads.Easily strap a day bag or just a jacket to your back seat using standard bungee chords or this Lockhart Phillips cargo net.
Part Number: 311 MSRP: CAN$31.3 Price: CAN$28.2
Bungee Buttons - Fender Rail Front Hole - Suzuki M109R ulliSave your fender with these CNC machined billet aluminum hard chromed Bungee Buttons. liThe Slot is perfectly sized for a bungee chord hook. liComes in pairs each item includes 2 CNC bungee buttons and 2 bolts with chromed heads.liEasily strap a day bag or just a jacket to your back seat using standard bungee chords or this Lockhart Phillips cargo net.liClean Kewl look when not in use.ulClick on the Installation Guide Below to find the correct Item number for your bike.
Part Number: 227 MSRP: CAN$31.3 Price: CAN$28.2
Bungee Buttons - Fender Rail Rear Hole - Suzuki M109R ulliSave your fender with these CNC machined billet aluminum hard chromed Bungee Buttons. liThe Slot is perfectly sized for a bungee chord hook. liComes in pairs each item includes 2 CNC bungee buttons and 2 bolts with chromed heads.liEasily strap a day bag or just a jacket to your back seat using standard bungee chords or this Lockhart Phillips cargo net.liClean Kewl look when not in use.ulClick on the Installation Guide Below to find the correct Item number for your bike.
Center Console Plain - Can-Am Spyder RS ulliCan-Am Center Console plain. liCNC Billet Aluminum powder coated to perfection for a beautiful and durable finishliThis cover allows the use of different handlebars on your Spyder to allow the rider to select the most comfortable riding position.ul
Part Number: KD-224 MSRP: CAN$172.33 Price: CAN$155.13
Chrome Billet Risers for VTX1300C Sculpted Chrome Billet Risers. These gorgeous chrome risers move your stock handlebars back and lay them down 13 degrees from the stock position. This moves the hand grips back 2.25 inches and gives your front end a whole new look and feel greatly increasing rider comfort. The stock cables and wires all reach so no need to replace anything These bolt on in minutesRise is around 1.5 inches.
Part Number: 195 MSRP: CAN$120.62 Price: CAN$108.9
Chrome CNC Billet Helmet Lock Chrome CNC Billet Helmet Lock. Can only be mounted to the end of all Kuryakyn ISO-Grips. Bolts on in minutes. Works with the throttle boss. Sold each or order KEWL-231 for a pair that use the same key.Comes with KEWL-232 helmet extender a 9.95 value. Get custom helmet extenders to match your personal style.We recommend the pair for a more balanced look. The pair comes with 4 matching keys
Part Number: 220 MSRP: CAN$120.62 Price: CAN$108.9
Chrome Reservoir Cap with Black Face for Honda Cruisers and Yamaha Roadstars Add this beautifully sculpted temp gage to your bike for a totally unique custom look. No more cheesy strap it to your handle bar mounts This is a sculpted piece of 6061 billet aluminum chromed to perfection The gage is high quality attractive and is weather proof and vibration resistant. Fits all late model Honda Cruisers AND all Yamaha Roadstars.
Part Number: 275 MSRP: CAN$103.38 Price: CAN$93.23
Chrome Tach Mount with Housing - Suzuki M109 Gorgeous Chrome Billet Tach Housing for the Suzuki M109. This slick billet aluminum tach housing re-locates your stock tach electronics to the top of the risers and gets rid of the stock plastic M109 tach housing completely. Totally sleeks up the front end lines of your M109 CNC machined to exacting tolerances his unit works with the stock Suzuki M109 risers or with any of the Kewlmetal M109 Risers. If you are running this on top of the Kewlmetal riser extensions for the stock risers please specify this when ordering because you will need some extended bolts that will work with the tach housing and the extended risers.Risers sold seperately.
Part Number: 385 MSRP: CAN$215.42 Price: CAN$194.3
Chrome Trim Ring Replace your stock plastic trim ring with our CNC billet trim ring. 6061-T6 Aluminum Polished to a mirror finish and hard chrome plated.
Part Number: 104 MSRP: CAN$146.48 Price: CAN$132.4
Chrome Triple Tree Set - 3 Degree Rake VTX1800 This chrome billet aluminum triple tree set will totally transform the look of your front end AND increase your rake by 3 degrees. They will lighten up the handling of your VTX but are not as touchy as the 6 degree setup because they maintain 4 plus inches of trail. These trees install exactly the same way your stock trees install so installation is a breeze. FITS: Honda VTX1800 all Models.RakeTree
Part Number: 267 MSRP: CAN$732.53 Price: CAN$659.7
Chrome-White Face Reservoir Cap - Honda Cruisers and Yamaha Road Star Add this beautifully sculpted temp gage to your bike for a totally unique custom look. No more cheesy strap it to your handle bar mounts This is a sculpted piece of 6061 billet aluminum chromed to perfection The gage is high quality attractive and is weather proof and vibration resistant. Fits all late model Honda Cruisers AND all Yamaha Roadstars.
Part Number: 276 MSRP: CAN$103.38 Price: CAN$93.23
Part Number: BAR-1011-2 MSRP: CAN$86.15 Price: CAN$77.56
Cup Holder - Can-Am Spyder RS ulliCan-Am Spyder Cup Holder and mount bracket for mounting on the KewlMetal Center Console ul
Part Number: KD-229 MSRP: CAN$30.52 Price: CAN$28.2
Curve Slash Cut Tips for Vance and Hines Big Shots These add a totally custom look to your pipes and your bike and bolt on in minutes CNC Billet Aluminum and hard chromed. These will fit the Vance Hines Big Shots with removable tips. Can be mounted in 4 rotational orientations.
Part Number: 243 MSRP: CAN$189.57 Price: CAN$170.8
Custom fork filler kit and accessory base mounting kit - VTX1800C VTX1800R. This kit completely cleans up the look of your front end and also serves as a mounting base for the Kewlmetal windshield mounts and other future accessories. This item is compatable with the Kewlmetal Fat Fork Tubes Item 166. Comes with mirror-polished stainless steel mounting bolts for a complete top quality custom installation. This kit also includes the side headlight filler plates.
Part Number: 174 MSRP: CAN$120.62 Price: CAN$108.9
Custom Triple Tree Set - 3 Degree - Honda VTX1300 ulliThe kit comes with upper fat fork tubes and lower fork adaptor. liThis is a show quality 6061 billet aluminum CUSTOM front end kit worthy of any show bike or your daily rider.liThe chrome is show quality period.ul
Part Number: 469 MSRP: CAN$1077.27 Price: CAN$969.97
Custom Triple Tree Set - 6 Degree - Honda VTX1300 ulliThe kit comes with upper fat fork tubes and lower fork adaptor. liThis is a show quality 6061 billet aluminum CUSTOM front end kit worthy of any show bike or your daily rider.liThe chrome is show quality period.ul
Part Number: 470 MSRP: CAN$1077.27 Price: CAN$969.97
Custom Triple Tree Set - 8 Degree Rake - Honda Valkyrie For Trikes or Raked Frames ONLY.These 8 degree trees remove most of the trail from your front steering geometry making your Trike steering light and easy. These are sometimes called Power Steering trees for trikes. If you have a trike with stock trees you wont believe the difference these trees will make in your riding experience. Makes your trike a real joy to ride not a workout on your arms These trees are a must have for your Valkyrie Trike.This chrome billet aluminum triple tree set will totally transform the look of your front end AND increase your rake by 8 degrees.
Part Number: 274 MSRP: CAN$732.53 Price: CAN$659.7
Custom Triple Tree Set - 8 Degree Rake - Honda VTX1800 and 1300 For Trikes or Raked Frames ONLY.These 8 degree trees remove most of the trail from your front steering geometry making your Trike steering light and easy. These are sometimes called Power Steering trees for trikes. If you have a trike with stock trees you wont believe the difference these trees will make in your riding experience. Makes your trike a real joy to ride not a workout on your arms These trees are a must have for your VTX Trike.This chrome billet aluminum triple tree set will totally transform the look of your front end AND increase your rake by 8 degrees.
Part Number: 273 MSRP: CAN$732.53 Price: CAN$659.7
Custom Windshield Mount Kit VTX1800C VTX1800R. This kit completely cleans up the look of your front end by eliminating the ugly fork tube clamps that come with most windshields. This kit is compatable with the Kewlmetal Fat Fork Tubes Item 166. Comes with mirror polished stainless steel mounting bolts for a complete top quality custom installation. Kits available for Memphis Shades and Hondaline windshields
Part Number: 178 MSRP: CAN$198.19 Price: CAN$178.63
Custom Windshield MountLightbar Honda Valkyrie Custom windshield mounting kit and lightbar for Hondaline windshields can also be used as a stand alone lightbar. Fits the Valkyrie. This kit completely cleans up the look of your front end by eliminating the ugly fork tube clamps that come with most windshields. This kit is compatible with the Kewlmetal Fat Fork Tubes Item KEWL-182 KEWL-183 and KEWL-184. Also provides mounting for 4 bullet lights. You can choose any combination of small or large bullets. For example you can use a pair of small bullets on top as turn signals and a pair of large bullets on the bottom as driving lights. If you want to run the large bullets on the bottom with a hondaline windshield you will need the signal standoff kit item KEWL-210.
Part Number: 209 MSRP: CAN$137.86 Price: CAN$124.57
Dragon Fork Guard for Valkyrie These are beautifully cut by a precision CNC laser polished to a mirror finish and then chrome plated. They are extremely durable and will keep their mirror finish even after being blasted by gravel and sand from the road. Our fork guards offer the same if not more protection to your inner fork tube as the stock fork guards. Made from 116 steel. FITS: Honda Valkyrie
Dual Bullet Light Mount Kit for Streak Victory Marauder These dual bullet light mounts are beautifully cut by a precision CNC laser and then hard chrome plated. For mounting large 4 x 2-516 bullet style lights with 38 hollow mounting bolt AND mini 2-78 x 1-58 bullets. The Large bullets are used as driving lights and the mini bullets as the turn signals. You can also mount 2 sets of large bullets and run the second set as signals or driving lights. These brackets fit bikes with windshields. The kit includes 4 standoffs and 4 mounting bolts. All mounting hardware is mirror-polished stainless steel for a complete top quality custom installation.The second picture shows them on a Meanie with only a small bullet in the top position.The third picture is what it looks like with the small bullets on top and the large bullets on the bottom example is a VTX1800C.
Part Number: 185 MSRP: CAN$86.15 Price: CAN$77.56
Dual Bullet Light Mount Kit Windshield Bikes VTX1800C VTX1800R. These dual bullet light mounts are beautifully cut by a precision CNC laser and then hard chrome plated. For mounting large 4 x 2-516 bullet style lights with 38 hollow mounting bolt AND mini 2-78 x 1-58 bullets. The Large bullets are used as driving lights and the mini bullets as the turn signals. You can also mount 2 sets of large bullets and run the second set as signals or driving lights. These brackets fit bikes with windshields. The kit includes 4 standoffs and 4 mounting bolts all mounting hardware is mirror polished stainless steel for a complete top quality custom installation.
Dual Light Mount Bracket Fits all Kewlmetal Lower Trees including the KMPS Kits AND HDL Brand X 6 Degree trees. These bullet signal mounts are beautifully cut by a precision CNC laser and then hard chrome plated. For mounting bullet style turn signals and driving lights. Mounts behind the Fork
Dual Mounting Brackets for Kuryakyn Silver Bullets These dual bullet light mounts are beautifully cut by a precision CNC laser and then hard chrome plated. For mounting large 4 x 2-516 bullet style lights with 38 hollow mounting bolt AND mini 2-78 x 1-58 bullets. The Large bullets are used as driving lights and the mini bullets as the turn signals.
Part Number: 168 MSRP: CAN$60.29 Price: CAN$54.84
Dual Signal Mount Bracket - VTX 1300 This CNC laser cut beautifully polished and chromed bracket will mount 2 bullet style lights to your lower triple tree outside the forks. Mounts all bullet style lights with 38 hollow mount bolts.
Part Number: 423 MSRP: CAN$86.15 Price: CAN$77.56
Exhaust Flame Tip - 3-12 Inch For Rinehart Pipes ulliFlame Exhaust tips 3 12liFitment: Rinehart Pipes.liExhaust Tip Measurements Installed on pipes: 8liLooking for some attentionulThese Flamed Tips add a totally custom look to your pipes and bolt on in minutes CNC machined from 6061-T-6 Billet Aluminum then mirror polished and triple chrome plated to a show chrome finish. These HOT KewlMetal tips are designed for use on the Rinehart 3-12 Pipes with removable tips and can be mounted in 8 rotational orientations.MADE IN THE USA
Part Number: KD-252 MSRP: CAN$318.85 Price: CAN$287.54
Exhaust Tips - Flamed - Cobra Speedsters ulliLooking for some attentionliThese Flamed Tips add a totally custom look to your pipes and bolt on in minutes CNC machined from 6061-T-6 Billet Aluminum then mirror polished and triple chrome plated to a show chrome finish. liThese HOT KewlMetal tips are designed for use on the Cobra speedsters 2-12 Pipes with removable tips and can be mounted in 8 rotational orientations.ulMADE IN THE USA
Part Number: KD-173 MSRP: CAN$258.52 Price: CAN$232.69
Part Number: BAR-1014 MSRP: CAN$117.49 Price: CAN$105.76
Fairing Bezels - Set of 6 - Black - Harley Davidson FLTR FLH ulliKewlMetal introduces their new Fairing Bezels for the Harley Davidson FLTR and FLH models. liThis set of six fairing bezels is machined from 6061 T6 Billet Aluminum. liMirror polished and Triple Chrome Plated. liThese are show quality bezels that will add a stand out style and finish to your fairing.ul
Part Number: 485-BL MSRP: CAN$172.33 Price: CAN$155.13
Fairing Bezels - Set of 6 - Brushed Aluminum - Harley Davidson FLTR FLH ulliKewlMetal introduces their new Fairing Bezels for the Harley Davidson FLTR and FLH models. liThis set of six fairing bezels is machined from 6061 T6 Billet Aluminum. liMirror polished and Triple Chrome Plated. liThese are show quality bezels that will add a stand out style and finish to your fairing.ul
Part Number: 485-BR MSRP: CAN$172.33 Price: CAN$155.13
Fairing Bezels - Set of 6 - Chrome - Harley Davidson FLTR FLH ulliKewlMetal introduces their new Fairing Bezels for the Harley Davidson FLTR and FLH models. liThis set of six fairing bezels is machined from 6061 T6 Billet Aluminum. liMirror polished and Triple Chrome Plated. liThese are show quality bezels that will add a stand out style and finish to your fairing.ul
Part Number: 485-C MSRP: CAN$172.33 Price: CAN$155.13
Fat Fork Caps for the VTX1300C These fork caps cover the stock fork cap hex to complete the chrome Fat Boy front end for the VTX1300C. This can be used separately or in conjunction with part number KEWL-130. By installing Part Number KEWL-130 and KEWL-131 and chrome plating the top triple tree the VTX1300C front end can be completely transformed to a gorgeous cruiser look. These caps avoid the need to dismantle the forks themselves to complete the project.
Part Number: 131 MSRP: CAN$34.43 Price: CAN$31.33
Flame Business Card Holder The Flame Business Card Holder for your desktop. Now you can have a beautiful piece of chrome steel on your desktop. This is a quality piece made the same way the chrome parts are made for your bike
Part Number: 158 MSRP: CAN$17.2 Price: CAN$15.66
Flame fork guards for the Kawasaki Mean Streak. Dress up the front end of your Mean Streak by replacing the plain plastic fork guards with our gorgeous chrome steel flame fork guards. These are beautifully cut by a precision CNC laser. Made from 12 gage steel and hard chromed for a durable mirror finish.
Part Number: 154 MSRP: CAN$112 Price: CAN$101.06
Fork Flames for Victory Kingpin Flame fork guards for the Victory Kingpin. Dress up the front end of your Victory by replacing the plain fork guards with our gorgeous chrome steel flame fork guards. These are beautifully cut by a precision CNC laser. Made from 14 gage steel and hard chromed for a durable mirror finish.
Part Number: 206 MSRP: CAN$112 Price: CAN$101.06
Fork Flames for VTX 1300 These are beautifully cut by a precision CNC water jet machine and then chrome plated. They are extremely durable and will keep their mirror finish even after being blasted by gravel and sand from the road. These will completly transform the front end of your bike. Covers the lower fork leg the ugly axle bolt and other miscellaneous hardware also covers the brake calipers. Installation is simple using the supplied universal fork clamps and hose clamps. Includes all necessary mounting hardware including rubber to protect your forks. Please check the a hrefhttp:www.kewlmetal.comDefault.aspxtabid30ctlCatalogItemDetailsmid369CatalogItemID112search233pagenumber0kewlmetal websitea for the latest fitment info.Known fitment issues:Honda VTX1300 - use KEWL-234 instead 233 can work on a VTX1300 but must be offset forward to clear the fender mount making it not cover the axle and brake caliper. bKEWL-234 is larger to cover this issue.b
Part Number: 234 MSRP: CAN$258.52 Price: CAN$232.69
Part Number: SPE-1164 MSRP: CAN$163.75 Price: CAN$148.07
Front Wheel Rotor Dress Up Hub w Kewl Metal Lowers - Honda VTX1800 Front Wheel Rotor Chrome Dress Up Hubs for VTX1800 ALL with Kewlmetal lower fork legs.Note - These hubs are ONLY compatible with Kewlmetals Lower fork legs Item KEWL-300 Item KEWL-302 Item KEWL-304 Item KEWL-306 or Item KEWL-308.
GIVI Trunk Mount Plate - Can-Am Spyder This adaptor plate allows the mounting of a GIVI trunk to your Kewlmetal Luggage Rack Item KEWL-KD-237. This plate is specifically designed to mount the GIVI E250 quick release base. The pics show the E250 base and the V46 monokey trunk. With this setup the trunk quick releases with a key so you can carry the trunk to your hotel room as luggage
Part Number: KD-246 MSRP: CAN$103.38 Price: CAN$93.23
GPS Gizmo Mount Bracket - Can-Am Spyder RT ulliMount bracket kit to mount your Garmin 550 GPS to your Can-Am Spyder RT handle bars. liThis bracket is also a universal gizmo mount. Any belt clip style cell phone holder or ipod holder can easily be attached to this bracketul
Part Number: KD-257 MSRP: CAN$43.05 Price: CAN$39.17
GPS Mount Bracket - Can-Am Spyder RS GPS Mount Bracket for mounting a GPS on the KewlMetal Center Console Item KEWL-KD-223 or KEWL-KD-224 on a Spyder RS only. This bracket can be used to mount just about any hand held electronics device. It has screw holes for the Garmin Zumo and several holes and slots to accommodate screws and straps in various configurations. This bracket can be mounted to the center console in the right left or center positions.Note: This part is designed to work with the KewlMetal Center Console on the Spdyer RS only.
Part Number: KD-227 MSRP: CAN$21.9 Price: CAN$20.36
Handlebars - 5 Inch Pull Back - Can-Am Spyder ulliHandlebars 5 pull back for Can-Am Spyder adds a clean customliAdds a comfortable rideliThese handlebars are designed specifically for the Can-Am Spyder.liThese bars allow for a much more comfortable and relaxed riding position on your Can-Am Spyder.liThe rise pull back and grip angle are all set to maximize rider comfort for your Can-Am Spyder.ulYou will also need to install the KewlMetal item KEWL-KD-223 or KEWL-KD-224 Center console with your new bars the stock center console will no longer work. The new KewlMetal center console has a beautiful custom look and provides 3 accessory mount points in the perfect locations for your GPS MP3 Intercom cup holder or whatever. This setup creates a clean integrated custom integration of your accessories without ugly handle bar clamps and universal style gizmo mounting hardware. There are several gizmo mount brackets available designed specifically for your new custom KewlMetal center console.
Part Number: KD-225 MSRP: CAN$60.29 Price: CAN$54.84
Handlebars 9 Inch Pull Back - Can-Am Spyder Can-Am Spyder Handlebars 9 pull back for a clean custom look and a much more comfortable ride. These handlebars are designed specifically for the Can-Am Spyder. These bars allow for a much more comfortable and relaxed riding position on your Can-Am Spyder. The rise pull back and grip angle are all set to maximize rider comfort for your Spyder. You will also need to install the Kewlmetal KEWL-KD-223 or KEWL-KD-224 Center console with your new bars the stock center console will no longer work. The new Kewlmetal center console has a beautiful custom look and provides 3 accessory mount points in the perfect locations for your GPS MP3 Intercom cup holder or whatever. This setup creates a clean integrated custom integration of your accessories without ugly handle bar clamps and universal style gizmo mounting hardware. There are several gizmo mount brackets available designed specifically for your new custom Kewlmetal center console.You will need longer cables with these handle bars.KEWL-SPE-1175 - Clutch Line KEWL-BAR-1014 - Throttle CablesKEWL-BAR-1015 - Reverse CableNote: These handlebars will not install with the stock Can-Am Center Console.Center Consoles sold separately:KEWL-KD-224 - Center Console KEWL-KD-223 - Center Console wInlay
Part Number: KD-247 MSRP: CAN$60.29 Price: CAN$54.84
Highway Brackets - Can-Am Spyder RT ulliThese brackets mount to your motor mount bolts and are very sturdy. liThey are CAD designed and CNC laser cut bent and welded. liThey are powder coated black for extreme durability. liThey provide a footpeg mount forward and outboard from your main footpegs so you can stretch your legs on those long rides. liAccommodates any footpeg that requires a 12 inch bolt hole to mount to. ulInstallation time: Approximately 3-4 hours but if you get it done before 3 hours... YOU are a CHAMPION Foot pegs sold separately.
Part Number: KD-248 MSRP: CAN$146.48 Price: CAN$132.4
Highway Brackets - Chrome - Victory Cross Country ulliHighway Brackets are all chrome Sold as a pairliOur Highway Brackets are designed to fit KY-8061 Short Magnum Peg Mount w 12-13 Thread. liWhen mounting floorboards we recommend Kuryakyns Short Magnum Peg Mount to install on our Highway Brackets.ul
Part Number: 516 MSRP: CAN$60.29 Price: CAN$54.84
Highway Footpeg Mounting Brackets - Can-Am Spyder RS ulliThese Brackets bolt on to your Motor Mount Bolts and provide a footpeg mount point approximately 12 inches forward and 4 inches outboard of the stock footpeg location. liThese are designed in 3D CAD laser cut CNC bent welded and then powder coated black.liSOLD AS A PAIRliFootpegs sold separately.liThe mounting hole is for a 12 inch bolt.ul
Part Number: KD-245 MSRP: CAN$129.24 Price: CAN$116.73
Honda VTX Key Chain The perfect keychain for your VTX. Laser Cut from steel polished and hard chromed. KEWL-119 has a small split ring that provides clearance so it wont hitrub while riding.Appr. 1-12 x 1
Kewlock each - Suzuki Boulevards Chrome CNC Billet Helmet Lock. Fits the handle bar end of all Suzuki Boulevards. Bolts on in minutes. Replaces the Stock Bar End Weight.Pair of Kewlocks sold under part number KEWL-272.
Part Number: 271 MSRP: CAN$43.05 Price: CAN$39.17
KewLock Helmet Lock - Victory VegasKingpinHammerJackpot 08 and newer The KewlMetal KewLock Helmet Locks for the stock grips on the 08 and newer Victory Vegas Kingpin Hammer and Jackpot are ready to go. They also work with the heated grips for these bikes.They install in less than 10 minutes with 3 simple tools.Now you can secure your helmet to your bike in seconds.
Part Number: 478 MSRP: CAN$103.38 Price: CAN$93.23
Kewlock Pair - Can-Am Spyder RT ulliKewlMetal Kewlocks pair. liThese bolt straight on to your Can-Am Spyder RT handle bars in place of the stock end caps. liProvides a super convenient place to lock up your helmets while you go inside for lunch Installs in minutes. liComes with two locks with 4 matching keys both locks are keyed the same.ulIncludes: 2 Helmet Lock 2 Adaptors 2 Helmet Extenders and 4 matching keys.
Part Number: 526 MSRP: CAN$103.38 Price: CAN$93.23
Kewlock Pair - Honda Gold Wing 01 - Newer ulliKewlmetal Kewlock grip tip helmet lock pair. liThese bolt straight on to your Honda Gold Wing handle bars in place of the stock end caps. liProvides a super convenient place to lock up your helmets while you go inside for lunch liInstalls in minutes. liComes with two locks with 4 matching keys both locks are keyed the same.ul
Part Number: 531 MSRP: CAN$103.38 Price: CAN$93.23
Kewlock pair - Suzuki Boulevards Chrome CNC Billet Helmet Lock pair with matching keys. Works with the handle bar end of all Suzuki Boulevards. Bolts on in minutes. Replaces the Stock Bar End Weight.Single Lock Sold under part number KEWL-271.
Part Number: 272 MSRP: CAN$86.15 Price: CAN$77.56
Kewlock Pair - Suzuki M90 ulliKewlMetal Kewlock for the Suzuki M90liNew KewlMetal Helmet lock is for the stock handle bar grips and install in minutes.liIncluded Items: Kewlock with key grip adaptor Helmet extender and all needed hardware to install on grips.ul
Part Number: 495 MSRP: CAN$86.15 Price: CAN$77.56
Kewlock Pair - Victory Vision ulliThe New Victory Vision KewLocks are ready to ship.liNow you can lock up your Helmet in a SNAPliThey work with both the Stock and Heated Grips.liThey come with 1 keyed alike KewLock 1 set of keys 1 Helmet Extender and 1 Vision bar end adaptor. liThese come complete and ready to install.liInstallation is quick and cleanul
Part Number: 476 MSRP: CAN$103.38 Price: CAN$93.23
Kewlock pair - Yamaha Bar Ends Chrome CNC Billet Helmet Locks. Fits the handlebar ends of all Yamaha Roadstars Thru 05. Sold as a pair with matching keys. Bolts on in minutes. Replaces the Stock Bar End Weights. Single is available as KEWL-258.
Part Number: 259 MSRP: CAN$103.38 Price: CAN$93.23
Kewlock Single - Can-Am Spyder RT ulliKewlMetal Kewlock single grip tip helmet lock. liThis bolts straight on to your Can-Am Spyder RT handle bar in place of the stock end cap.liProvides a super convenient place to lock up your helmet while you go inside for lunch Installs in minutes.ul Includes: 1 Helmet Lock 1 Adaptor 1 Helmet Extender and 2 matching keys.
Part Number: 534 MSRP: CAN$51.67 Price: CAN$47
Kewlock Single - Suzuki M90 ulliKewlMetal Kewlock for the Suzuki M90liNew KewlMetal Helmet lock is for the stock handle bar grips and install in minutes.liIncluded Items: Kewlock with key grip adaptor Helmet extender and all needed hardware to install on grips.ul
Part Number: 494 MSRP: CAN$43.05 Price: CAN$39.17
Kewlock Single - Victory Vision ulliThe New Victory Vision KewLocks are ready to ship.liNow you can lock up your Helmet in a SNAPliThey work with both the Stock and Heated Grips.liThey come with 1 keyed alike KewLock 1 set of keys 1 Helmet Extender and 1 Vision bar end adaptor. liThese come complete and ready to install.liInstallation is quick and cleanul
Part Number: 475 MSRP: CAN$51.67 Price: CAN$47
Kewlock single - Yamaha Bar End Chrome CNC Billet Helmet Lock. Fits the handle bar end of all Yamaha Roadstars Thru 05. Bolts on in minutes. Replaces the Stock Bar End Weight. Pair is available as KEWL-259.Fits: Yamaha Roadstars up to 2005 with stock handlebars
Part Number: 258 MSRP: CAN$51.67 Price: CAN$47
KMPS Pro Street Rake Kit - Bolt On This BOLT ON kit will rake your front forks to 45 degrees AND maintain correct trail numbers. The engineering geometry of this setup results in the front end being LIGHTER than stock at both low speed and high speed. High speed stability is excellent.This kit TOTALLY transforms the look of your bike with no welding required. Installation time is 8 hours in your garage.Other Parts needed to complete this installation are:1 4 inch Lower Fork Leg Extensions KEWL-212. 4 inch extension drops the front end about 1.5 from stock ride height2 Kewlmetal KMPS risers KEWL-293 or KEWL-294 or other risers of your choice top tree is 13 degrees back from stock3 Front brake line kit KEWL-KD-160 braided stainless lines kits made specifically for the KMPS kit.4 KMPS Headlight Bracket KEWL-313 or KEWL-316.Optional:Fat Fork Tubes for the KMPS Kit.PATENT PENDING.
Part Number: 284 MSRP: CAN$2844.07 Price: CAN$2559.69
KMPS Risers for Drag Bars - VTX1800 Risers for Drag Bars For KMPS kit on the VTX1800 and VTX1300. Can also be used with the stock bars if more pull back is desired.
Part Number: 293 MSRP: CAN$172.33 Price: CAN$155.13
Part Number: 294 MSRP: CAN$172.33 Price: CAN$155.13
Large Bullet Fork Cap - Honda VTX1800 ulliThese CNC cut billet aluminum caps are perfectly mirror polished and hard chromed. liThe clean chamfered design adds a very clean and custom look to the top of your fork tubes. liThese install with clear silicone which unlike a set screw they will not come loose they can be perfectly centered and they do not damage the fork cap underneath. liThey can be easily removed and re-installed for fork maintenance.ul
Part Number: 235 MSRP: CAN$86.15 Price: CAN$77.56
Large Mounting Brackets for Kuryakyn Silver Bullets These large bullet light mounts are beautifully cut by a precision CNC laser and then hard chrome plated. For mounting large 4 x 2-516 bullet style lights with 38 hollow mounting bolt. The Lights shown here are used as driving lights with the stock signals still in place. The large bullets can also be used as turn signals.
Part Number: 167 MSRP: CAN$40.47 Price: CAN$36.82
Large Speedo Bezel - Black - Harley Davidson Softail Road King ulliIf youre seeking custom looks a classic and easy accessory.KewlMetals got itliKewlMetals custom speedo bezel dresses up your stock speedometer. liThis billet machined and beautifully finished masterpiece installs in seconds.ul
Part Number: 486-BL MSRP: CAN$60.29 Price: CAN$54.84
Large Speedo Bezel - Brushed Aluminum - Harley Davidson Softail Road King ulliIf youre seeking custom looks a classic and easy accessory.KewlMetals got itliKewlMetals custom speedo bezel dresses up your stock speedometer. liThis billet machined and beautifully finished masterpiece installs in seconds.ul
Part Number: 486-BR MSRP: CAN$60.29 Price: CAN$54.84
Large Speedo Bezel - Chrome - Harley Davidson Softail Road King ulliIf youre seeking custom looks a classic and easy accessory.KewlMetals got itliKewlMetals custom speedo bezel dresses up your stock speedometer. liThis billet machined and beautifully finished masterpiece installs in seconds.ul
Part Number: 486-C MSRP: CAN$60.29 Price: CAN$54.84
Large Wind Deflectors - Large - Victory Kingpin Vegas Hammer Jackpot Totally sleek and custom black Lexan Lower Wind Deflectors pair. Replaces your lower wind deflector kits from the OEM Victory Kingpin Vegas Hammer and Jackpot models. Enhances the look of your front end instantly especially with KewlMetals Chrome Art work sold separately.
Part Number: KD-265 MSRP: CAN$67.34 Price: CAN$61.11
Part Number: SPE-1170 MSRP: CAN$148.83 Price: CAN$133.97
Lower Fat Fork Tube - Hour Glass w Ball End Mill For VTX1800 This chrome billet aluminum Fat Fork Tube set will TOTALLY transform the look of your bike. These scream CUSTOM....CUSTOM...CUSTOM....all the way These tubes are compatable with the Kewlmetal 3 degree triple trees or the HDL Brand X 6 degree trees. It just depends on how much rake you want to add and how little trail you are comfortable with. Fits the VTX1800 all Models with Kewlmetal 3 degree triple trees or the HDL Brand X 6 degree trees.These are the lower tubes only and you will need the upper tubes KEWL-252 as well.
Part Number: 253 MSRP: CAN$193.88 Price: CAN$174.71
Part Number: 290 MSRP: CAN$193.88 Price: CAN$174.71
Lower Fat Fork Tubes - Suzuki M109R These lower Fat Boy Fork covers will totally transform the front end of your M109R. They are machined from billet 6061-T6 aluminum and hard chromed.
Part Number: 337 MSRP: CAN$155.09 Price: CAN$140.24
Lower Fat Fork Tubes - VTX1800 These lower Fat Boy Fork covers will totally transform the front end of your VTX 1800. They are machined from billet 6061-T6 aluminum and hard chromed. The stock VTX 1800C front end is shown below side by side with the Kewlmetal front end for comparison. The pics show the front end with the Kewlmetal fork tubes fork caps and with the triple trees chromed. Installation is simple see the support section of the website to read the installation instructions. Two O-rings keep the tubes snug and rattle free. The stock turn signals get displaced so we installed the Kury small LED turn signals using the Kewlmetal bullet signal mounting brackets Item 120.
Part Number: 160 MSRP: CAN$155.09 Price: CAN$140.24
Part Number: 331 MSRP: CAN$198.19 Price: CAN$178.63
Lower Triple Tree Cover Plate for Valkyrie This lower triple tree cover plate is for the Valkyrie. Really dresses up the under side of the lower triple tree. It hides the ugly hard to clean insides of the stock lower triple tree with a beautiful chrome steel plate that installs in minutes and is easy to clean. This fits the Valkyrie with the Kewlmetal Fat Forks item 182 and also fits stock bikes.
Part Number: 201 MSRP: CAN$30.99 Price: CAN$28.2
Lower Triple Tree Cover Plate Victory Kingpin This lower triple tree cover plate really dresses up the under side of the lower triple tree. It hides the ugly hard to clean insides of the stock lower triple tree with a beautiful chrome steel plate that installs in minutes and is easy to clean. Compatable with Kewlmetal fat fork tubes.
Part Number: 204 MSRP: CAN$34.43 Price: CAN$31.33
Lower Triple Tree Cover Plate VTX1800C VTX1800R This really dresses up the under side of the lower triple tree. Hides the ugly hard to clean insides of the stock lower triple tree with a beautiful chrome steel plate that installs in minutes and is easy to clean.
Part Number: 162 MSRP: CAN$30.99 Price: CAN$28.2
Lower Wind Deflectors - Small - Victory Kingpin Vegas Hammer Jackpot Totally sleek and custom black Lexan Lower Wind Deflectors pair. Replaces your lower wind deflector kits from the OEM Victory Kingpin Vegas Hammer and Jackpot models. Enhances the look of your front end instantly especially with KewlMetals Chrome Art work sold separately.
Part Number: KD-264 MSRP: CAN$56.37 Price: CAN$50.92
Luggage Rack - Black - Victory Jackpot Hammer ulliIntroducing the New KewlMetal Black Powder Coated Quick disconnect Luggage Rack system for the Victory Jackpot Hammer.liThis new rack is not only quick disconnect but looks Great tooliGoes on and off your bike in less than a Minuteul
Part Number: 438-B MSRP: CAN$292.99 Price: CAN$264.03
Luggage Rack - Can-Am Spyder ulliThis is the most versatile luggage rack system you can buy for your Spyder. liThe installation pictures show the luggage rack which can be used just as is for a small rack for daily use. liThe decorative slots underneath also function as bungee chord hook points. Installation of this rack is a breeze liThe rack frame underneath slides into the Spyders backbone so it is super sturdy becoming an integral extension of the frame itself. liOnce the frame extension is installed a 15 minute job at most the rack itself can come on and off in minutes. liOnce the rack is removed the stock tailcone can be re-installed without removing the Kewlmetal frame extension.ul
Part Number: KD-237 MSRP: CAN$258.52 Price: CAN$232.69
Luggage Rack - Chrome - Victory Jackpot Hammer ulliIntroducing the KewlMetal Chrome Quick disconnect Luggage Rack system for the Victory Jackpot Hammer.liThis new rack is not only quick disconnect but looks Great tooliGoes on and off your bike in less than a Minuteul
Part Number: 438-C MSRP: CAN$344.7 Price: CAN$310.26
Luggage Rack - Chrome - Victory Vegas Kingpin ulliKewl-464-C KewlMetals Quick Disconnect Luggage Rack for the Victory Vegas and KingpinulTo install you will need 2 sets of KewlMetal Bungee Buttons Item KEWL-311
Part Number: 464-C MSRP: CAN$344.7 Price: CAN$310.26
Luggage Rack - Suzuki M109 This new Kewl Luggage Rack is a quick disconnect unit that attaches to the Kewlmetal Bungee Buttons.Note: Bungee Buttons Item 226 227 sold seperately.
Part Number: 388 MSRP: CAN$344.7 Price: CAN$310.26
Luggage Rack - VTX1800CN This new Kewl Luggage Rack is a quick disconnect unit that attaches to the Kewlmetal Bungee Buttons.Note: Bungee Buttons Item 226 227 sold seperately.
Part Number: 389 MSRP: CAN$344.7 Price: CAN$310.26
Luggage Rack Chrome - Suzuki M109 This new Kewl Luggage Rack is a quick disconnect unit that attaches to the Kewlmetal Bungee Buttons.Note: Bungee Buttons - Item 226 227 are required to install this rack and are sold seperately.
Part Number: 480-C MSRP: CAN$313.36 Price: CAN$282.05
Luggage Rack Top Plate - Can-Am Spyder ulliThis top plate makes your Kewlmetal luggage rack Item KEWL-KD-237 even larger and more versatile Must have the Item KEWL-KD-237 Installed to use this.ul
Part Number: KD-238 MSRP: CAN$86.15 Price: CAN$77.56
Part Number: 518-C MSRP: CAN$344.7 Price: CAN$310.26
Mini Handlebar - Can-Am Spyder ulliShort Handle Bar for the Can-Am Spyder designed specifically so you can run the Kewlmetal center console and the Kewlmeta Adjustable Risers. liAll stock cables and wires will work with these handle bars. DEPENDING on how up and back you want to adjust your risers. liWe suggest trying the stock cables first then buy the longer cables if you want more pull back.ulNote: These handlebars will not install with the stock Can-Am Center Console.Center Consoles sold separately:KEWL-KD-224 - Center Console KEWL-KD-223 - Center Console wInlay
Part Number: KD-261 MSRP: CAN$60.29 Price: CAN$54.84
Mirror Extensions - Can-Am Spyder ulliCan-Am Spyder Mirror Extensions. liThese mirror extensions move your mirrors out 2 inches greatly increasing your rearward visibility. liMounts in minutes without dis-connecting any wires. liMade from 6061 T-6 billet aluminum and black powder coated with a textured finish that matches the Spyder mirrors perfectly. liSold as a set.ul
Part Number: KD-219 MSRP: CAN$93.98 Price: CAN$84.61
Mirror Extensions - Hole Design Mirror Extensions Curve End Mill Design. For Any motorcycle with mirror posts M10 x 1.25 thread.
Part Number: 414 MSRP: CAN$86.15 Price: CAN$77.56
Mounting Brackets for Kuryakyn Silver Bullets - VTX C90 The bullet signal mounts are beautifully cut by a precision CNC laser and then hard chrome plated. For mounting mini 2-78 x 1-58 bullet style turn signals with 38 mounting bolt.
Part Number: 120 MSRP: CAN$40.47 Price: CAN$36.82
Mounting Brackets for Kuryakyn Silver Bullets for Mean Streak 1600 Marauder Valkyrie These are beautifully cut by a precision CNC laser and then chrome plated. For Mounting Bullet Style Turn Signals with 38 mounting bolt. Made from 12 gage steel. Shown with Kuryakyn LED mini Bullets. Also works with the Suzuki M109R REAR for bikes that remove the stock tag mount and rear signals. Totally changes the look of the rear end
Part Number: 153 MSRP: CAN$39.14 Price: CAN$35.25
Non-Slip Kewl Grip - Honda ulliNon-Slip Kewl Grip liThese Absolutely Gorgeous CNC cut Billet Grips are the newest slickest billet grips on the market bar noneliThey have integrated Kewlock helmet locks in the tipsliThey are RUBBER ISOLATION MOUNTED. liTheyre easy to remove and re-installed without glue or set screws that can come loose. liOnce you put these on in place of your old rubber grips you wont believe what a different look your bike will have and because they are Rubber Mounted they are VERY comfortable.ul
Part Number: 422 MSRP: CAN$137.86 Price: CAN$124.57
Non-Slip Kewl Grip w KewlLock - Honda ulliNon-Slip Kewl Grip w KewlLock. liThese Absolutely Gorgeous CNC cut Billet Grips are the newest slickest billet grips on the market bar noneliThey have integrated Kewlock helmet locks in the tipsliThey are RUBBER ISOLATION MOUNTED. liTheyre easy to remove and re-installed without glue or set screws that can come loose. liOnce you put these on in place of your old rubber grips you wont believe what a different look your bike will have and because they are Rubber Mounted they are VERY comfortable.ul
Part Number: 421 MSRP: CAN$189.57 Price: CAN$170.8
Performance Air Filter Kit - Can-Am Spyder RS ulliPerformance Air Filter Kit for your Can-Am Spyder RS Does not fit the RT. liThis is a high quality machined aircraft billet air filter setup for your Can-Am Spyder. liThis kit utilizes a proven KN air filter. Dont trust your motor to the leaky plastic stock air box that lets dirt past the filter element. liThis setup seals tight as a drum using a round air filter with a bolt on lid just like your classic muscle cars liCleans up the engine compartment and makes the throttle body and vacuum lines ect. much easier to access and inspect. liThis setup also eliminates the sticky oil mess that the stock air box has. liThe Crankcase vents directly into the throttle body throat so NO oil gets in the air box.ul
Part Number: 504 MSRP: CAN$198.19 Price: CAN$178.63
Pro Street Kit 1300 w Lower Fork Sliders - Honda VTX1300 Made In The USAulliThis BOLT ON kit will rake your front forks to 45 degrees AND maintain correct trail numbers. liThe engineering geometry of this setup results in the front end being LIGHTER than stock at both low speed and high speed. High speed stability is excellent. liThese parts are all high quality billet 6061 T6 aluminum and steel where required CAD designed and CNC machined to exacting specifications. liThe chrome is show quality period. A new steel steering shaft that is stronger than your stock shaft is included. liThe kit also includes brand new upgraded steering bearings.This kit TOTALLY transforms the look of your bike with no welding required. Installation time is 8 hours in your garage. liAll hardware necessary to rake and extend your forks are included. liThis Kit Includes EVERYTHING you will need to complete the assembly except the extended brake line and the Kewlmetal universal head light mount part KEWL-387.ulbItems needed to complete your installation:bKEWL-387 - Universal Headlight Bracket KEWL-293 - KMPS Risers for drag bars KEWL-299 - Kewl Riser CapsKEWL-SPE-1159 - Front Brake Line Single Line Only for KMPSItem needed If you are running stock bars:KEWL-387 - Universal Headlight BracketKEWL-294 - KMPS Risers for Stock BarsKEWL-299 - Kewl Riser CapsKEWL-SPE-1158 - Extended Brake Line Single Line Only Plus 2 12
Part Number: 283-S MSRP: CAN$2240.77 Price: CAN$2016.72
Part Number: 490 MSRP: CAN$172.33 Price: CAN$155.13
Pulley Cover and Lowering Kit - Victory Hammer Jackpot 04 - 07 ulliDue to the Belt hitting the stock pulley cover when the bike is lowerd on the 2007 and older Victory Jackpot and Hammer models this New KewlMetal Custom Chrome Pulley cover allows the bike to be lowerd with no interferance with the drive belt.liThis kit lowers the bike 1-12 inches in the rear and gives your scoot that custom mean low look everyone loves to look at.ul
Part Number: 400 MSRP: CAN$284.37 Price: CAN$256.2
Pulley Cover and Lowering Kit - Victory Hammer Jackpot 07 - Newer ulliDue to the Belt hitting the stock pulley cover when the bike is lowered on the 2007 and older Victory Jackpot and Hammer models this New KewlMetal Custom Chrome Pulley cover allows the bike to be lowered with no interference with the drive belt.liThis kit lowers the bike 1-12 inches in the rear and gives your scoot that custom mean low look everyone loves to look at.ul
Part Number: 467 MSRP: CAN$301.61 Price: CAN$271.87
Part Number: KD-220-Y MSRP: CAN$43.05 Price: CAN$39.17
Rear Bullet Light Mount Kit - Can-Am Spyder ulliThis kit allows you to mount a set of bullet lights in place of the stock plastic rear turn signals on a Can-Am Spyder. liThe bullet lights shown here are the Kewlmetal Item 431-B with clear lenses. liThese lights are installed using the NM-1001 Triple Play unit LED lights which fit right into the KewlMetal Bullets.ulNOTE: Due to the Spyders electronics we have installed these lights using the NM-1001 Triple play unit. These electronics are engineered specifically for the Spyder. Wiring halogen bullet lights in place of the Spyder rear turn signals will likely cause problems with the Spyders electrical system and is NOT recommended.
Part Number: KD-242 MSRP: CAN$34.43 Price: CAN$31.33
Reservoir Cap with Black Face Clock - Harley Models Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts This is a sculpted piece of 6061 billet aluminum chromed to perfection The clock is high quality attrictive and is weather proof and vibration resistant. Fits all late model Harleys 96-05. Please verify fitment with manufacturer.
Part Number: 247 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Cap with Black Face Clock - Honda Models Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts This is a sculpted piece of 6061 billet aluminum chromed to perfection The clock is high quality attrictive and is weather proof and vibration resistant. Fits all late model Honda cruisers and all Yamaha Road Stars.
Part Number: 240 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Cap with White Face Clock - Harley Models Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts This is a sculpted piece of 6061 billet aluminum chromed to perfection The clock is high quality attrictive and is weather proof and vibration resistant. Fits all late model Harleys 96-05. Please verify fitment with manufacturer.
Part Number: 248 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Cap with White Face Clock - Honda Models Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts This is a sculpted piece of 6061 billet aluminum chromed to perfection The clock is high quality attrictive and is weather proof and vibration resistant. Fits all late model Honda cruisers and all Yamaha Road Stars.
Part Number: 241 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Clock - Black Finish - Black Face - Harley Davidson Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts This is a sculpted piece of 6061 billet aluminum beautifully polished and black anodized The clock is high quality attractive and is weather proof and vibration resistant. Fits all late model Harleys 96-05.
Part Number: 249 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Clock - Black Finish - White Face - Harley Davidson Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts This is a sculpted piece of 6061 billet aluminum beautifully polished and black anodized The clock is high quality attractive and is weather proof and vibration resistant. Fits all late model Harleys 96-05
Part Number: 250 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Clock - Black Finish Black Face - Victory 02 to 07 Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts The clock is high quality attractive and is weather proof and vibration resistant. Fits all Victories Vegas Kingpin Hammer Jackpot.
Part Number: 265 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Clock - Black Finish White Face - Victory Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts The clock is high quality attractive and is weather proof and vibration resistant. Fits all Victories Vegas Kingpin Hammer Jackpot.
Part Number: 266 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Clock - Chrome - White Face - Victory Models 02- 07 Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts This is a sculpted piece of 6061 billet aluminum beautifully polished and chromed to perfection The clock is high quality attractive and is weather proof and vibration resistant. Fits all Victories.
Part Number: 264 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Clock Mount - Black Black Face - Honda Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts This is a sculpted piece of 6061 billet aluminum beautifully polished and black anodized The clock is high quality attrictive and is weather proof and vibration resistant. Fits all late model Honda cruisers AND all Yamaha Road Stars Except Warrior.Please Note: Clock numbershands do NOT glow in the dark.
Part Number: 245 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Clock Mount - Black Face - Kawasaki ulliAdd this beautifully sculpted clock to your bike for a totally unique custom look. liNo more cheesy strap it to your handle bar clock mounts liThis is a sculpted piece of 6061 billet aluminum chromed to perfection liThe clock is high quality attractive and is weather proof and vibration resistant.ul
Part Number: 450 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Clock Mount - Black w Black Face - Kawasaki ulliAdd this beautifully sculpted clock to your bike for a totally unique custom look.liNo more cheesy strap it to your handle bar clock mountsliThis is a sculpted piece of 6061 billet aluminum polished and black anodizedliThe clock is high quality attractive and is weather proof and vibration resistant.ul
Part Number: 454 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Clock Mount - Black w White Face - Kawasaki ulliAdd this beautifully sculpted clock to your bike for a totally unique custom look.liNo more cheesy strap it to your handle bar clock mountsliThis is a sculpted piece of 6061 billet aluminum polished and black anodizedliThe clock is high quality attractive and is weather proof and vibration resistant.ul
Part Number: 455 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Clock Mount - Black White Face - Honda Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts This is a sculpted piece of 6061 billet aluminum beautifully polished and black anodized The clock is high quality attrictive and is weather proof and vibration resistant. Fits all late model Honda cruisers AND all Yamaha Road Stars except Warrior.Please Note: Clock numbershands do NOT glow in the dark.
Part Number: 246 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Clock Mount - White Face - Kawasaki ulliAdd this beautifully sculpted clock to your bike for a totally unique custom look. liNo more cheesy strap it to your handle bar clock mounts liThis is a sculpted piece of 6061 billet aluminum chromed to perfection liThe clock is high quality attractive and is weather proof and vibration resistant.ul
Part Number: 451 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Clock-Chrome Finish - Black Face - Victory Models 02- 07 Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts This is a sculpted piece of 6061 billet aluminum beautifully polished and chromed to perfection The clock is high quality attractive and is weather proof and vibration resistant. Fits all Victories.
Part Number: 263 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Kewlclock Black Face - Harleys 94 and earlier Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts This is a sculpted piece of 6061 billet aluminum chromed to perfection The clock is high quality attractive and is weather proof and vibration resistant. Also check out our Kewlclock for later model Harley DavidsonsItem 247 BlackItem 248 White
Part Number: 319 MSRP: CAN$86.15 Price: CAN$77.56
Reservoir Kewlclock White Face - Harleys 94 and earlier Add this beautifully sculpted clock to your bike for a totally unique custom look. No more cheesy strap it to your handle bar clock mounts This is a sculpted piece of 6061 billet aluminum chromed to perfection The clock is high quality attractive and is weather proof and vibration resistant. Also check out our Kewlclock for later model Harley DavidsonsItem 247 BlackItem 248 White
Part Number: 320 MSRP: CAN$86.15 Price: CAN$77.56
Riser Caps Riser Caps for Drag Bars Item 293 Can also be used with the Stock bars if more pull back is desired Item 294. For KMPS kit on the VTX1800 and VTX1300.
Part Number: KD-209 MSRP: CAN$77.53 Price: CAN$70.51
Riser For Drag Bars - Victory Stock Trees ulliItem 452 - 2 inch Chrome riser for Fly Bars Ram Bars and Victory V Bars.liThese simple and clean risers are easy to install.liThese risers come with longer hardware to allow you to use them with your stock trees.liThese risers are popular for stock Hammer V-bar owners in particular who may want just a bit more height and pull back. liSimple trig based upon factory Victory 32.9 degree rake angle yields that our 2.0 inch risers will produce: li1.7 rise li1.1 inch pullbackul
Part Number: 452 MSRP: CAN$86.15 Price: CAN$77.56
Risers - 2 Inch - Suzuki M90 2 Inch Riser for the Suzuki M90. Fits on top of your stock riser. You will need the KEWL-SPE-1177 Extended brake line kit to install these risers. Finished to match your stock risers.
Part Number: 502 MSRP: CAN$86.15 Price: CAN$77.56
Risers 2 Inch - Hole Design - Suzuki M90 ulli2 Inch Extended risers for your Suzuki M90. Gorgeous Billet Aluminum and triple chromed. You will need the SPE-1177 extended brake lines for this.liIncludes riser caps.ul
Part Number: KD-236 MSRP: CAN$215.42 Price: CAN$194.3
Risers Stock Length - Hole Design - Suzuki M109 Risers Stock Length Hole Design for Suzuki M109Note: Item KEWL-KD-209 riser caps and stock tach mount bracket are required for mounting stock tachometer onto these chrome risers sold separately.
Part Number: KD-235 MSRP: CAN$198.19 Price: CAN$178.63
Rod Ends - Chrome - Victory Models ulliWorks with all KewlMetal Shifter Linkages designed for the Victory motorcycles.liThese Chrome adjusting rod ends and locking taper nuts will enhance the look of your stock or Custom designed KewlMetal Shifter Linkages.liIts the little things that finish up the projects.ulWhats Included:Kit includes 2 Chrome Rod ends and 2 Chrome lock nuts.
Part Number: 453 MSRP: CAN$39.92 Price: CAN$36.03
Scalloped Lower Fat Fork Tubes - VTX1800 This chrome billet aluminum Fat Fork Tube set will TOTALLY transform the look of your bike. These scream CUSTOM....CUSTOM...CUSTOM....all the way These tubes are compatable with the Kewlmetal 3 degree triple trees or the HDL Brand X 6 degree trees. It just depends on how much rake you want to add and how little trail you are comfortable with. These are the lower tubes only and you will need the upper tubes KEWL-256 as well. FITS: VTX1800 all Models with Kewlmetal 3 degree triple trees or the HDL Brand X 6 degree trees.
Part Number: 257 MSRP: CAN$193.88 Price: CAN$174.71
Scalloped Upper Fat Fork Tube - VTX1800 This chrome billet aluminum Fat Fork Tube set will TOTALLY transform the look of your bike. These scream CUSTOM....CUSTOM...CUSTOM....all the way These tubes are compatable with the Kewlmetal 3 degree triple trees or the HDL Brand X 6 degree trees. It just depends on how much rake you want to add and how little trail you are comfortable with. These are the upper tubes only and you will need the lower tubes KEWL-257 as well.FITS: VTX1800 all Models with Kewlmetal 3 degree triple trees or the HDL Brand X 6 degree trees.
Part Number: 256 MSRP: CAN$193.88 Price: CAN$174.71
Sculpted Chrome Billet Risers For Mean Streak These gorgeous chrome risers move your stock handlebars back and lay them down 10 degrees from the stock position. This moves the hand grips back 2.0 inches and gives your front end a whole new look and feel greatly increasing rider comfort. The stock cables and wires all reach so no need to replace anythingFits the Kawasaki Mean Streak 1500 1600 and the Suzuiki Marauder 1600.
Part Number: 215 MSRP: CAN$120.62 Price: CAN$108.9
Sculpted Chrome Billet Risers For Mean Streak Same as 215 Risers with 1 inch additional rise. These gorgeous chrome risers move your stock handlebars back and lay them down 10 degrees from the stock position. This moves the hand grips back 2.0 inches and up 1 inch. Gives your front end a whole new look and feel greatly increasing rider comfort. Note: You WILL need longer cables with these risers.
Part Number: 270 MSRP: CAN$137.86 Price: CAN$124.57
Shifter Linkage V Tribal Plus 2 Inches - Victory ulliKewlMetal introduces their beautiful water cut shifter linkages for your Victory. liKewlMetals V Tribal shifter linkage is a perfect accessory to transform your bike instantly liDress up your bike and give it a unique custom look KewlMetal V Tribal Linkage eaulNote: May need to cut new threads on Shifter Linkage
Part Number: 326-2 MSRP: CAN$103.38 Price: CAN$93.23
Side Mount Tag Mount - Black - Suzuki M109 Check out our new M109 Side mount Tag Mount. Locates under the rear fender for a new clean look Designed to be used with the Kewlmetal Item KEWL-153 Bullet Turn Signal Mount Brackets. KewlMetals Small Bullet Lights are compatible Item KEWL-431-B
Part Number: 339-B MSRP: CAN$77.53 Price: CAN$70.51
Part Number: 416 MSRP: CAN$103.38 Price: CAN$93.23
Side Mount Tag Mount - Suzuki M109R Check out our new M109 Side mount Tag Mount. Locates under the rear fender for a new clean look Designed to be used with the Kewlmetal Item 153 Bullet Turn Signal Mount Brackets.
Part Number: 339 MSRP: CAN$103.38 Price: CAN$93.23
Single Light Bracket - Honda VTX1800 ulliThese single bullet light mounts are beautifully cut by a precision CNC laser and then hard chrome plated.liSingle Light Brackets sold as a pair.liMade in the USAul
Skull Backrest Insert - Honda VTX1800N This skull backrest cover is beautifully CNC water jet cut from 304 stainless and then polished to a mirror finish has the same appearance as chrome and will never peel or flake. Fits the Hondaline Deluxe backrest for the VTX1800N.
Part Number: 244 MSRP: CAN$43.05 Price: CAN$39.17
Slash Cut Exhaust Tip - Rinehart 2-12 Inch Pipes ulliLooking for some attentionliThese Slash Cut Tips add a totally custom look to your pipes and bolt on in minutes liCNC machined from 6061-T-6 Billet Aluminum then mirror polished and triple chrome plated to a show chrome finish. liThese HOT KewlMetal tips are designed for use on the Rinehart 2-12 Pipes with removable tips and can be mounted in 8 rotational orientations.ulMADE IN THE USA
Part Number: KD-175 MSRP: CAN$189.57 Price: CAN$170.8
Slash Cut Exhaust Tips Curved - Victory Cruisers These add a totally custom look to your pipes and your bike and bolt on in minutes CNC Billet Aluminum and hard chromed. Fits all Victory Stage 1 Drag 2 12 Cobra Speedsters and 2 12 Victory Speedsters.
Part Number: 350 MSRP: CAN$189.57 Price: CAN$170.8
Small Black Bullet Light Curved Bezel - Amber Lens Image shows Chrome version.Billet CNC curve bezel Halogen Bullet Lights. These are CAD designed and then perfectly cut by a precision CNC from 6061 T6 Billet Aluminum and then triple chrome plated. Completely concealed clean assembly no screws are used to hold these together super slick and clean custom look. For use as a turn signal driving lights tail lights. Comes with 8mm hollow mounting bolt. bWARNING: THE BULLET LIGHT MOUNT STUD IS ONLY TORQUED TO 8 FT. LBS. MAX.bbWARNING:b If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 431-B-A MSRP: CAN$125.32 Price: CAN$112.82
Small Black Bullet Light Curved Bezel - Clear Lens Image shows Chrome version.Billet CNC curve bezel Halogen Bullet Lights. These are CAD designed and then perfectly cut by a precision CNC from 6061 T6 Billet Aluminum and then triple chrome plated. Completely concealed clean assembly no screws are used to hold these together super slick and clean custom look. For use as a turn signal driving lights tail lights. Comes with 8mm hollow mounting bolt. bWARNING: THE BULLET LIGHT MOUNT STUD IS ONLY TORQUED TO 8 FT. LBS. MAX.bbWARNING:b If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 431-B-C MSRP: CAN$125.32 Price: CAN$112.82
Small Black Bullet Light Curved Bezel - Red Lens Image shows Chrome version.Billet CNC curve bezel Halogen Bullet Lights. These are CAD designed and then perfectly cut by a precision CNC from 6061 T6 Billet Aluminum and then triple chrome plated. Completely concealed clean assembly no screws are used to hold these together super slick and clean custom look. For use as a turn signal driving lights tail lights. Comes with 8mm hollow mounting bolt. bWARNING: THE BULLET LIGHT MOUNT STUD IS ONLY TORQUED TO 8 FT. LBS. MAX.bbWARNING:b If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 431-B-R MSRP: CAN$125.32 Price: CAN$112.82
Small Bullet Light Flame Bezel - Clear Lens Billet CNC 3 Dimensional FLAME Bezel Halogen Bullet Lights. These lights are UNIQUE in the motorcycle market place Chrome flame licks sparkle beautifully in the light These are CAD designed and then perfectly cut by a precision CNC from 6061 T6 Billet Aluminum and then triple chrome plated. Completly concealed clean assembly no screws are used to hold these together super slick and clean custom look. For Use as a turn signal or tail light or whatever your imagination can come up with Comes with 8mm hollow mounting bolt. Uses a 38-16 bolt.WARNING: THE BULLET LIGHT MOUNT STUD IS ONLY TORQUED TO 8 FT. LBS. MAX.bWARNING:b If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 432-C MSRP: CAN$140.99 Price: CAN$126.92
Small Chrome Bullet Light Curved Bezel - Amber Lens Billet CNC curve bezel Halogen Bullet Lights. These are CAD designed and then perfectly cut by a precision CNC from 6061 T6 Billet Aluminum and then triple chrome plated. Completely concealed clean assembly no screws are used to hold these together super slick and clean custom look. For use as a turn signal driving lights tail lights. Comes with 8mm hollow mounting bolt. WARNING: THE BULLET LIGHT MOUNT STUD IS ONLY TORQUED TO 8 FT. LBS. MAX.bWARNING:b If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 431-C-A MSRP: CAN$125.32 Price: CAN$112.82
Small Chrome Bullet Light Curved Bezel - Clear Lens Billet CNC curve bezel Halogen Bullet Lights. These are CAD designed and then perfectly cut by a precision CNC from 6061 T6 Billet Aluminum and then triple chrome plated. Completely concealed clean assembly no screws are used to hold these together super slick and clean custom look. For use as a turn signal driving lights tail lights. Comes with 8mm hollow mounting bolt. WARNING: THE BULLET LIGHT MOUNT STUD IS ONLY TORQUED TO 8 FT. LBS. MAX.bWARNING:b If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 431-C-C MSRP: CAN$125.04 Price: CAN$112.82
Small Chrome Bullet Light Curved Bezel - Red Lens Billet CNC curve bezel Halogen Bullet Lights. These are CAD designed and then perfectly cut by a precision CNC from 6061 T6 Billet Aluminum and then triple chrome plated. Completely concealed clean assembly no screws are used to hold these together super slick and clean custom look. For use as a turn signal driving lights tail lights. Comes with 8mm hollow mounting bolt. WARNING: THE BULLET LIGHT MOUNT STUD IS ONLY TORQUED TO 8 FT. LBS. MAX.bWARNING:b If you are installing these as turn signals on a 2007 and older Victory you MUST change the 20 watt bulb to a 10 watt bulb. If you connect the 20 watt halogen bulb to the Victory turn signal circut you will burn out the circuit. The bulbs are a common MR11 Halogen bulb and are available at most hardware stores or directly from KewlMetal.
Part Number: 431-C-R MSRP: CAN$125.32 Price: CAN$112.82
Small Gizmo Mount Bracket - Can-Am Spyder RS Can-Am Spyder RS Small Gizmo Mount Bracket for mounting a MP3 or XM radio or cell phone holder on the KewlMetal center console Item KEWL-223 or KEWL-224. This bracket can be used to mount just about any small electronics device. It has several holes and slots to accommodate screws and straps to hold your device in place. This bracket can be mounted to the center console in the right left or center positions. Also can be used to mount the KewlMetal air ride switches.
Part Number: KD-228 MSRP: CAN$17.2 Price: CAN$15.66
Stainless Steel Helmet Lock Extender Item 232. Our Stainless Steel Helmet Extender is the perfect economical solution to extend your D-ring to fit into the Kewlmetal helmet locks or any other helmet lock that needs an extender. 12 gage stainless steel and will last a lifetime.
Part Number: BAR-1009 MSRP: CAN$117.49 Price: CAN$105.76
Tool Bag Mount - Inside Windshield VTX1800RVTX1300R This Tool Bag mount bracket mounts a tool bag inside your windshield with the flap facing the rider. The tool bag straps go through the slots and are firmly attached. Installs in minutes and is easy to clean. Made from 12 gage steel polished and hard chromed for a durable mirror like finish. Comes with polished stainless steel mounting hardware.
Part Number: 156 MSRP: CAN$86.15 Price: CAN$77.56
Tool Bag Mount - VTX1800 This Tool Bag mount bracket keeps your tool bag from scratching up your risers handlebars or headlight. Standard tool bag straps go through the slots and are firmly attached or the Kewlmetal tool bags attach with special flush mounting screws. Made from 12 gauge steel polished and hard chromed for a durable mirror-like finish. This tool bag mount ONLY mounts to the Kewlmetal VTX1800 Windshield mounting base that comes with Item 172 174 or 178.
Part Number: 213 MSRP: CAN$51.67 Price: CAN$47
Tool Bag Mount VTX1300C VTX1300R This Tool Bag mount bracket keeps your tool bag from scratching up your risers handlebars or headlight. Tool bag straps go through the slots and are firmly attached. There is also a routing hole for the throttle cables that helps keep your throttle cables off your headlight. Also dresses up the under side of the upper triple tree. Hides the ugly hard to clean insides of the stock upper triple tree. Installs in minutes and is easy to clean. The two dimples provide clearance for the handle bar studs. Comes with two stainless steel button head screws for mounting. Made from 12 gage steel polished and hard chromed for a durable mirror like finish.
Part Number: 155 MSRP: CAN$77.53 Price: CAN$70.51
Triple Tree Set - 6 degree Rake This chrome billet aluminum triple tree set will totally transform the look of your front end and increase your rake by 6 degrees. These trees are NOT recommended for installation on a stock frame VTX and are designed for raked frame chopper projects or Trikes. These trees install exactly the same way your stock trees install so installation is a breeze. These trees are a totally new design and have the same fork clamping power as a stock triple tree. Choose from 3 new fat fork tube designs to complete your project Part Nos. KEWL-252 through KEWL-257 are all compatable with these trees. Finish up the look with our lower fork leg KEWL-302.RakeTree
Part Number: 291 MSRP: CAN$732.53 Price: CAN$659.7
Trunk Mount Plate - Can-Am Spyder This adaptor plate allows the mounting of virtually any travel trunk to your Kewlmetal Luggage Rack Base Item KEWL-237. This plate has PEM studs installed which match up to the hole pattern in your Kewlmetal luggage rack base which allors for quick installation and removal of your trunk from your Spyder once this plate is installed to the bottom of your trunk. The hole pattern in the plate for the Victory travel trunk is already in place. For any other trunks simply drill to match your trunkYou will need the Kewlmetal Luggage Rack Base Item KEWL-237 installed to use this mount plate.
Part Number: KD-240 MSRP: CAN$103.38 Price: CAN$93.23
Universal Fork Flames These are beautifully cut by a precision CNC water jet machine and then chrome plated. They are extremely durable and will keep their mirror finish even after being blasted by gravel and sand from the road. These will completly transform the front end of your bike. Covers the lower fork leg the ugly axle bolt and other miscellaneous hardware also covers the brake calipers. Installation is simple using the supplied universal fork clamps and hose clamps. Includes all necessary mounting hardware including rubber to protect your forks. These work with 95 of all bikes with NON INVERTED FORKS
Part Number: 233 MSRP: CAN$258.52 Price: CAN$232.69
Universal Headlight Bracket This new Headlight Bracket is Universal for VTX 3 6 8 Degree Kewlmetal Trees. Also fits Kewlmetal Pro Street Kit.Item KEWL-205 Blinker Relocation brackets will also work with this new Headlight bracket
Part Number: 491 MSRP: CAN$146.48 Price: CAN$132.4
Universal Risers For Drag Bars ulliSculpted Chrome Billet Risers. liThese gorgeous chrome risers move your Drag Bars back 2 inches and moves them up 2 inches from the stock position. liGives your front end a whole new look and feel greatly increasing rider comfort. liThese bolt on in minutesul
Part Number: 550 MSRP: CAN$117.49 Price: CAN$105.76
Part Number: 288 MSRP: CAN$193.88 Price: CAN$174.71
Upper Fat Fork Tube - Plain Machined from billet 6061-T6 aluminum and hard chromed.Fits KMPS Kit KEWL-284 for the VTX1800 and VTX1300.
Part Number: 286 MSRP: CAN$193.88 Price: CAN$174.71
Upper Fat Fork Tube - Scallop Machined from billet 6061-T6 aluminum and hard chromed.Fits KMPS Kit KEWL-284 for the VTX1800 and VTX1300.
Part Number: 289 MSRP: CAN$193.88 Price: CAN$174.71
Upper Fat Fork Tube - VTX1800 This chrome billet aluminum Fat Fork Tube set will TOTALLY transform the look of your bike. These scream CUSTOM....CUSTOM...CUSTOM....all the way These tubes are compatable with the Kewlmetal 3 degree triple trees or the HDL Brand X 6 degree trees. It just depends on how much rake you want to add and how little trail you are comfortable with.Fits the VTX1800 all Models with Kewlmetal 3 degree triple trees or the HDL Brand X 6 degree trees.These are the upper tubes only and you will need the lower tubes KEWL-253 as well.
Part Number: 252 MSRP: CAN$193.88 Price: CAN$174.71
Upper Fat Fork Tubes - Suzuki M109R These upper Fat Boy Fork covers will totally transform the front end of your M109R. They are machined from billet 6061-T6 aluminum and hard chromed.
Part Number: 338 MSRP: CAN$155.09 Price: CAN$140.24
Upper Fat Fork Tubes - VTX1800 These upper Fat Boy Fork covers will totally transform the front end of your VTX 1800. They are machined from billet 6061-T6 aluminum and hard chromed. The stock VTX 1800C front end is shown below side by side with the Kewlmetal front end for comparison. The pics show the front end with the Kewlmetal fork tubes fork caps and with the triple trees chromed. Installation is simple see the support section of the website to read the installation instructions. Two O-rings keep the tubes snug and rattle free. The stock turn signals get displaced so we installed the Kury small LED turn signals using the Kewlmetal bullet signal mounting brackets Item 120.
Part Number: 159 MSRP: CAN$155.09 Price: CAN$140.24
Upper Triple Tree Cove Plate VTX1800C VTX1800R This really dresses up the under side of the upper triple tree. Hides the ugly hard to clean insides of the stock upper triple tree with a beautiful chrome steel plate that installs in minutes and is easy to clean. The two dimples provide clearance for the handle bar studs. Comes with two stainless steel button head screws for mounting. Fits both Standard and Fat Forks
Part Number: 163 MSRP: CAN$34.43 Price: CAN$31.33
Upper Triple Tree Cover Plate - VTX1800C VTX1800R This really dresses up the under side of the upper triple tree. Hides the ugly hard to clean insides of the stock upper triple tree with a beautiful chrome steel plate that installs in minutes and is easy to clean. The two dimples provide clearance for the handle bar studs. Comes with two stainless steel button head screws for mounting. Note: If you have the Kewlmetal fat fork tubes use item 163 instead.
Part Number: 135 MSRP: CAN$34.43 Price: CAN$31.33
Victory Air Intake Fits the Victory Vegas Jackpot and the Eightball. Allows more air flow for greater performance
Part Number: KD-172 MSRP: CAN$172.33 Price: CAN$155.13
Part Number: 408 MSRP: CAN$129.24 Price: CAN$116.73
Windshield Mount Kit Victory with Fat Forks Custom windshield mounting kit. Fits Victory Kingpin and Hammer. This kit is compatible with the Kewlmetal Fat Fork Tubes Item KEWL-202. Comes with mirror-polished stainless steel mounting bolts for a complete top quality custom installation.
Part Number: 269 MSRP: CAN$129.24 Price: CAN$116.73
Winglets - Victory Cross Country ulliSignificantly reduces head buffeting. Installs in minutes.liWhats Included: Left and Right side deflectors with hardware.ul
Part Number: KD-260 MSRP: CAN$30.52 Price: CAN$28.2
X - Backplate Insert for Cobra MiniSmall Sissy Bar X backrest insert for the Cobra SmallMini sissy Bar. Laser cut from steel polished and beautifully chrome plated.MUST have a Cobra Mini Sissy Bar Backrest or a Small Sissy Bar Backrest installed in order for this insert to fit on your bike
Part Number: 171 MSRP: CAN$43.05 Price: CAN$39.17
X ccessory X Pair Chrome X for personalizing your riding apparel. 12 gage steel perfectly laser cut polished and Bright Chrome Finished. Great for lacing into your jacket vest or ........ Sold in pairs
Part Number: 138 MSRP: CAN$21.12 Price: CAN$19.58
X Emblem- Honda VTX18001300 Cs with solo seat Chrome X for mounting on the seat mount stud when running a solo seat. 12 gage steel perfectly laser cut polished and Bright Chrome Finished.
Part Number: 137 MSRP: CAN$30.99 Price: CAN$28.2
WARUM KAUFEN IN CRUISERCUST0MIZING.COM EIN?
Wir bieten Ihnen eine sicher Einkaufenerfahrung überprüft von McAfee, Welt Sicherheit Führer, kostenloser Versand, Rücksendung ohne Angabe von Gründen und überragende Kundenbetreuung.
